Tube Clamp Fittings
Rackingman's range of Tube Clamp fittings is extensive & the fittings are quick
to assemble with use of an allen key.
Products There are 80 products.
Clamp to allow 4 tubes to be connected at 90 degrees to an upright tube.In Stock
Clamp allowing the connection of two tubes at 90 degrees. Common to see in retro fit applications.In Stock
Used to form a 90 degree connection between two tubes. For existing structures TF137 & TF160 can be retro fitted.In Stock
Although most commonly used in handrailing and safety guardrailing situations, the variety of structures made possible by the wide extent of the versatile range is only limited by your ingenuity.In Stock
Normally used to connect a horizontal tube to a sloping handrail. Angle is set then secured with a setscrew.In Stock
A versatile fitting for more difficult angles. This fitting is riveted together although it is available separately as TF167M & TF173 (x2).In Stock
Double lugged fitting.In Stock
Swivel fitting. Although riveted together, is available separately as TF168M & TF173F (x2).In Stock
Double lug 90 degree fitting.In Stock
Swivel wall fitting. Available separately as TF169M & TF173. To provide sufficient stability, whole structures must not be made from swivel fittings alone.In Stock
Swivel wall fitting. Only size only to suit all sizes of TF173.In Stock
For attaching mesh panels to one side of tube. For double-sided clips, please refer to type TF171.In Stock