A straight fitting for joining two tubes of the same size. SCF149 (external sleeve joint) is an external alternative. Only suitable for 3.25mm Wall Thickness.

Clamp to allow 4 tubes to be connected at 90 degrees to an upright tube.

Used to form a 90 degree connection between two tubes. For existing structures TF137 & TF160 can be retro fitted.

Swivel wall fitting. Available separately as TF169M & TF173.  To provide sufficient stability, whole structures must not be made from swivel fittings alone.

Swivel wall fitting. One size. Suits all of TF173F fittings.  

Single lugged fitting. Can be supplied pre-assembled to type SCF173F to form type TF173.

Used with other fittings to increase slip load capacity or to support other fittings which are left to rotate freely on tube.

Usually used where chains need to be easily removed for access. The tube cannot be joined within the fitting.

Often used for mounting boards practically flush with tubes.

Versatile fitting with a multitude of uses. Can be supplied pre-assembled with other fittings to form types TF167, TF168, SCF169 and TF173.

Often used for mounting boards practically flush with tubes.