A straight fitting for joining two tubes of the same size. TF150 (internal joiner) is internal alternative.

A straight fitting for joining two tubes of the same size. TF149 (external sleeve joint) is an external alternative. Only suitable for 3.25mm Wall Thickness.

Variable base flange for sloping installations. Adjustable from 0 to 11 degrees.

Variable short tee for sloping installations. Adjustable from 0 to 11 degrees. Alternative fitting: TF155 (Variable Long Tee).

Variable elbow for sloping installations. Consider using when the top rail meets the end upright. Adjustable from 0 to 11 degrees.

Variable long tee for sloping installations. Adjustable from 0 to 11 degrees. Tubes can be joined within this fitting.

Variable long tee for sloping installations. Adjustable from 0 to 11 degrees. The through tube (vertical in photo) cannot be joined within this fitting.

Clamp to allow 4 tubes to be connected at 90 degrees to an upright tube.

Clamp allowing the connection of two tubes at 90 degrees. Common to see in retro fit applications. 

Used to form a 90 degree connection between two tubes. For existing structures TF137 & TF160 can be retro fitted.

Although most commonly used in handrailing and safety guardrailing situations, the variety of structures made possible by the wide extent of the versatile range is only limited by your ingenuity.

Normally used to connect a horizontal tube to a sloping handrail. Angle is set then secured with a setscrew.