Used with SCF138 (Gate Eye) to form gate hinges.

Used to attach to walls or attaching kickplates to uprights.

A self colour straight fitting for joining two tubes of the same size. SCF150 (internal joiner) is internal alternative.

A straight fitting for joining two tubes of the same size. SCF149 (external sleeve joint) is an external alternative. Only suitable for 3.25mm Wall Thickness.

Clamp to allow 4 tubes to be connected at 90 degrees to an upright tube.

Used to form a 90 degree connection between two tubes. For existing structures TF137 & TF160 can be retro fitted.

Swivel wall fitting. Available separately as TF169M & TF173.  To provide sufficient stability, whole structures must not be made from swivel fittings alone.

Swivel wall fitting. One size. Suits all of TF173F fittings.  

The through tube (sloping in photo) cannot be joined within the fitting. The assembly is riveted together, although items can be supplied separately as TF173M and TF173F. Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.

Single lugged fitting. Can be supplied pre-assembled to type SCF173F to form type TF173.

Used with other fittings to increase slip load capacity or to support other fittings which are left to rotate freely on tube.

Usually used where chains need to be easily removed for access. The tube cannot be joined within the fitting.